Skip to main content

GOCAD Mining Suite – The construction of plausible geological models
Will become available on our YouTube channel

In this lecture, Shaun O’Connor will demonstrate how to use the built-in scripting tools in GOCAD Mining Suite for exploratory geological modelling with sparse data. During exploratory modelling, sparse geological constraints, surfaces, solids, or curves are used to construct multiple plausible models for evaluation using geophysical forward modelling. This lecture will demonstrate extending GMS using scripting, rapid model generation from limited geological constraints, and easy integration with geophysical inversion software.

Register now!

Notes about the software:

GOCAD Mining Suite is an industry-leading platform providing 3D earth models tools that handle geological, geophysical, geochemical, structural, and geotechnical data. It specializes in the subsurface modelling of challenging environments within the realms of exploration, resource assessment, mine sites, and geotechnical modelling. It is the leading 3D geological software for structural modelling, excelling even where drillhole control is minimal or non-existent. It exceeds in geologically-based 3D inversion and geophysical modelling, complex stratigraphic and fault modelling, geotechnical rock mass modelling and hazard assessment.

Come to this session with your questions. You’ll be able to submit them directly to Shaun during our live Q&A session.

Shaun is an exploration geologist with over 10 years of experience in exploration and geological modelling in varied environments, including Cordilleran arcs and intrusions, Archean greenstone belts, bimodal volcanic systems, and mafic-ultramafic intrusives. Shaun’s focus is on geological models, from the mine-scale to regional-scale, the empirical controls on mineralization, and the use of geological models to solve problems like mineral prospectivity and geological uncertainty. He is skilled in the geological interpretation of geophysical data including magnetics, gravity, EM, and IP. He is an expert in the application of Python and the development of custom solutions for geological data processing, analysis, and machine learning for mineral prospectivity and knowledge discovery.

Shaun’s approach to modelling is to develop an understanding of each new mineral system in consultation with client experts and through deep analysis of the available geological and geophysical data. He uses his extensive modelling experience, data science skills, and understanding of mineral deposits and geological data to transform data into constraints and design geological models that help clients accomplish their exploration goals.

Before joining Mira Geoscience, Shaun worked for Mercator Geological Services, Goldcorp Red Lake Mines, and Golden Predator Corp. He obtained his MSc in geological sciences from Queen’s University and is based in Halifax.

Latest events and news

October, 12 2020

Create regions – Crossplot 2D

In GOCAD Mining Suite you can filter data dynamically before creating regions and save the filters as templates for later use...
Read more
June, 18 2022

Filter records with, or without files associated to them

Geoscience INTEGRATOR offers the convenience of associating files to data records to...
Read more
September, 13 2021

Manual classifications vs Project classifications

In Geoscience INTEGRATOR, There are two ways to create classifications when importing data...
Read more
GOCAD Mining Suite
March, 01 2022

The value of using structural restoration tools in exploration modelling – Virtual Lecture

Watch recording - Jean-Philippe shows the use of structural restoration tools in GMS as a modelling tool for structurally controlled deposits...
Read more
April, 01 2022

K-means clustering: compute inertia curve

In Geoscience ANALYST Pro the K-means clustering utility includes the ability to compute the data’s inertia curve...
Read more
Geoscience ANALYST
March, 11 2021

Peak finder – Geoscience ANALYST geoapps: Python application

Past event. Link to recording available here.
Read more
November, 01 2021

Block model volume

In Geoscience ANALYST you can visualize your block model data by volume in the Visual Parameters panel... ..
Read more
May, 03 2019

Documents linked to a project

When documents are linked to a project in Geoscience INTEGRATOR, it is possible to be more specific and link them to the project’s data sets...
Read more
May, 11 2022

Effective date field

Geoscience INTEGRATOR v3.7 offers the Effective date upload field for files and maps...
Read more
Software releases
October, 14 2025

New release – Geoscience INTEGRATOR 4.2

Geoscience INTEGRATOR 4.2 unveils a range of new features and improvements designed to boost performance and enhance user experience.
Read more
April, 12 2021

Geological 3D-GIS query

In GOCAD Mining Suite, you can create points at specific geological contacts for the construction of your geological contact surface...
Read more
August, 01 2021

Search for Objects – find anything, anywhere, anytime

In GOCAD Mining Suite find any objects you're looking for in no time...
Read more

Please contact our team for additional information about our products and services